Introduction

The Turquoise Feather 3/4 Inch Buckle & Keeper Set is a premium Western hardware set from Texas Uniques, featuring antique nickel and copper plating with simulated turquoise cabochons in a raised-relief feather motif design, sized specifically for 3/4 inch leather straps. This matched buckle and keeper set coordinates seamlessly with the full Turquoise Feather concho collection, allowing craftsmen and tack builders to achieve a unified, professional look across complete custom projects.

Product Description

The Turquoise Feather 3/4 Inch Buckle & Keeper Set showcases a beautifully rendered raised-relief feather motif executed in a rich combination of antique nickel and copper plating. At the center of the design, a simulated turquoise cabochon stone provides a striking focal point that captures the spirit of authentic Southwestern craftsmanship. The buckle features a center bar design precisely sized for 3/4 inch (19mm) leather straps, ensuring reliable function and a secure fit. Paired with a coordinating keeper that mirrors the buckle's sculptural design language, the set delivers visual continuity and a polished, intentional appearance on any project. The zinc alloy base provides excellent dimensional stability and consistent casting detail, faithfully reproducing the fine lines and textures of the feather motif across every piece produced.

A multi-stage antiquing finish is carefully applied to accentuate the high-relief details of the feather design while deepening the recesses to create an authentic aged Western appearance with rich tonal depth. This finishing process gives each set a character and warmth that complements both new and vintage leather equally well. A clear protective topcoat is applied to preserve the finish and extend the life of the plating under regular use. The Turquoise Feather Buckle & Keeper Set is ideally suited for a wide range of applications, including headstalls, hatbands, belts, watch straps, bridle leather, horse tack, custom leather goods, and decorative trim. Because the set provides a cohesive, matched look from buckle to keeper, it delivers the kind of professional consistency that distinguishes custom work. The set also coordinates with the full Turquoise Feather concho family, enabling leatherworkers and tack makers to build out complete custom projects with a unified design theme from end to end.

Key Features

Antique nickel and copper plating, Simulated turquoise cabochon stones, Raised-relief feather motif, Center bar buckle design, Matching keeper included, Fits 3/4 inch (19mm) leather straps, Zinc alloy base construction, Multi-stage antiqued finish, Clear protective topcoat, Coordinates with Turquoise Feather concho collection.

Specifications

SKU: CON00300-H-IIA186003
Buckle Width: Approximately 1 inch (25mm) across
Buckle Height: Approximately 3/4 inch (19mm)
Usable Strap Width: 3/4 inch (19mm)
Product Finish: Antique nickel and copper plating
Base Material: Zinc alloy
Weight: Approximately 0.12 lbs (combined set)
Set Includes: One (1) center bar buckle, one (1) matching keeper
Mounting Style: Center bar with loop geometry for 3/4 inch straps
Recommended Fasteners: Chicago screws, small rivets, or leather stitching

Care & Installation

Clean with a soft, dry cloth to remove dust and fingerprints. Avoid abrasive cleaners, harsh chemicals, and ultrasonic cleaning, which can damage the antiqued finish and plating. A light application of Renaissance Wax or similar museum-grade micro-crystalline wax can help preserve the finish.

Installation Steps:

1. Select a 3/4 inch (19mm) leather strap of appropriate thickness.
2. Thread the strap end through the buckle bar from underneath.
3. Fold the strap back approximately 1 inch and secure with a Chicago screw, rivet, or saddle stitch.
4. Slide the keeper onto the strap to hold the tail flat when buckled.
5. Trim excess strap length if desired, leaving enough tail for the keeper to capture.

Tools Needed:

Leather punch or hole punch, Chicago screw setter or rivet setter, cutting tool (if trimming strap)

Included Hardware:

One (1) center bar buckle, one (1) matching keeper. Fasteners (Chicago screws, rivets) are not included and should be selected based on your project requirements.

Notes:

This buckle set is designed for 3/4 inch (19mm) straps only. Strap thickness up to approximately 8-9 oz leather is recommended for proper fit and tongue clearance. Test fit before final assembly.